Best AK47 Compensator

Best AK47 Compensator

Compensators are muzzle devices that help reduce muzzle climb and recoil when you shoot a rifle.

Some also act as flash hiders, which help reduce the brightness of the blast when a bullet exits the muzzle.

But the main purpose of a compensator is to reduce muzzle climb allowing you to make quick follow-up shots without losing accuracy.

Those that act as flash hiders, not many of them do a good job of mitigating the blast signature. But many that act as brakes, do effectively help in reducing recoil. Which is why most compensators also act as muzzle brakes.

You can find a muzzle device that acts as a flash hider, brake, and compensator, but only very few of them can effectively do what each of these devices is designed to do. And if you do get one that does, it’s going to cost you.

But if all you want is a compensator that can effectively keep your rifle down when your firing round after round, then you are in luck.

There are some great options available to choose from, you just need to figure out what you want. And this is going to depend on your budget and shooting style

With that said, let us look at some of the best AK47 compensators available.

Top Pick

VG6 Precision APVG100015A Epsilon

VG6 Precision APVG100015A Epsilon

  • 6 Valve Holes
  • Indexing Pin Slot
  • Extended Flash Prongs
  • Crush Washer Included

AK47 Compensators Comparison Chart

PhotoProductFeaturesPrice

VG6 Precision APVG100015A Epsilon

VG6 Precision APVG100015A EpsilonThreads: 14x1 LH
Material: Stainless Steel
Length: 2.21"

Weight: 2.24 oz
Check Price

Lantac DGNAK47B Dragon

Lantac DGNAK47B DragonThreads: 14x1 LH
Material:  Hardened Milspec Steel
Length: 2.6"

Weight: 2.8 oz
Check Price

Primary Weapons J-TAC47

Primary Weapons J-TAC47Threads: 14x1 LH
Material: Stainless Steel
Length: 1.95"

Weight: 2.4 oz
Check Price

Primary Weapons FSC47 MOD 2

Primary Weapons FSC47 MOD 2Threads: 14x1 LH
Material: Steel
Length: 2.10"

Weight: 2 oz
Check Price

Precision Armament A04022 M4-72

Precision Armament A04022 M4-72Threads: 14x1 LH
Material: Hardened Steel
Length: 2.25"
Weight: 2.6 oz
Check Price

5 Best AK47 Compensators (as of October, 2024):

1. VG6 Precision APVG100015A Epsilon AK47 Compensator Review

VG6 Precision APVG100015A Epsilon

The VG6 Precision APVG100015A Epsilon is a device that any AK47 owner would love.

While it is advertised as a muzzle brake, it also acts as a compensator and flash hider.

As a compensator, this device does a great job of reducing muzzle rise thanks to the holes on the top side of the device.

And the prongs at the end of the device act as the flash hider to reduce flash.  

As a muzzle brake, the VG6 Epsilon does an excellent job of mitigating recoil. So when you shoot your AK47, the felt recoil is significantly reduced.

While many muzzle brakes also act as compensators, they do not act as flash hiders. So to have all three in a single device is extremely amazing and that is what so appealing about this device.

Another cool thing about this device is that you can attach a VG6 concussion reduction device to help mitigate the blast when you shoot your rifle.

This device is commonly referred to as a muzzle shroud. It does not come with the VG6 Epsilon, but you can buy it from the manufacturer or any VG6 distributor.

VG6 Precision APVG100015A Epsilon Review, Pros and Cons

As for the build, it is made using stainless steel that is heat-treated for added strength and durability. 

So overall, the Epsilon is a great muzzle device that allows you to have better control of your rifle. And it also helps improve your accuracy.

Main Features

  • Extended Flash Prongs
  • 6 Valve Holes On the Underside Of The Brake
  • Indexing Pin Slot
  • Improved Muzzle Control
  • Improved Accuracy
  • 17-4ph Heat Treated Stainless Steel
  • Black Nitride Satin Finish
  • 14×1.0 LH Thread Pitch
  • Crush Washer Included

Pros:

  • Stainless Steel construction with black nitride finish
  • Improved muzzle control
  • Improved accuracy
  • Comes equipped with a crush washer
  • Lightweight
  • Easy to install
  • Aesthetically pleasing

Cons:

  • Ideal for 7.62x39mm AK47 only
  • Increased noise
  • Pricey

2. Lantac DGNAK47B Dragon AK47 Compensator Review

Lantac DGNAK47B Dragon

The Lantac DGNAK47B Dragon muzzle brake does more than reduce recoil, it also reduces muzzle climb.

And this model is a bit special because it comes with a short energy pulse system that decreases recoil length allowing you to make accurate and quick subsequent shots.

The device has 4 holes on the top and a total of 6 vents on the sides. So it has a total of 10 openings where the blast and gases can exit when you shoot your rifle.

Lantac DGNAK47B Dragon Review, Pros and Cons

As a compensator, the Lantac Dragon is ideal for competition shooters due to its ability to keep your rifle down when making follow up shots.

The carbon steel build is impervious to corrosion, heat, and wear. You can use this in any weather condition and it’s not going to get damaged or perform less effectively.

It’s quite versatile. You can fit any AK47 variant as well as AR15s and other rifles. When it comes to installation, it’s pretty simple, easy, and straightforward. And it does come with a crush washer for installation if you need it. 

Lantac DGNAK47B Dragon for AR15
Via: @sumnlikeaboss27

You can mount a blast mitigation device on this muzzle brake to reduce the blast when there are other shooters beside you.

The only issue some users have with the device is the cost. It is quite expensive. So if you use your rifle for recreation, you may consider a more affordable muzzle device.

Main Features

  • Unique Short Energy Pulse System
  • Full Auto Fire With Massively Reduced Recoil
  • Vertical Ports in the Primary Discharge Chamber
  • Blast Mitigation Device
  • 14x1LH Metric Threads
  • Made From Carbon Steel
  • Black Nitride QPQ Finish
  • Crush Washer Included
  • Impervious To Heat, Corrosion & Wear
  • Serial Numbered for Quality Control
  • NOT Considered a Flash Hider – California Legal

Pros:

  • Carbon steel construction for strength and durability
  • Corrosion-resistant
  • Durable and lightweight
  • Easy to install
  • Short energy pulse system that reduces recoil length
  • Effectively mitigates muzzle climb and recoil
  • Can be used together with a concussion reduction device
  • Can fit a wide range of AK variants

Cons:

  • It is expensive

3. Primary Weapons J-TAC47 AK47 Compensator Review

Primary Weapons J-TAC47

Primary Weapons J-TAC47 have been in the gun business for years, so they know their stuff.

And this is evident in the numerous positive reviews their products get.

The J-TAC, which also has plenty of positive user reviews is a recoil compensator designed to fit AK47 rifles.

It is designed to reduce recoil without increasing the noise of the blast, by redirecting the blast away from you and any shooter that is near or beside you.

The two j-shaped ports on the sides of the device allow you to have better control of your rifle while improving your accuracy.

The ports are quite large, so a lot of the gas that propels the bullet out of the muzzle when you shoot your rifle exit, thereby reducing felt recoil and concussion. 

Primary Weapons J-TAC47 Review, Pros and Cons

And aside from reducing recoil, the device also mitigates muzzle climb allowing you to make quick follow-up shots while maintaining your accuracy.

As for the construction, the J-TAC is sturdy and tough. And weighing at 2.4 ounces, it does not add any weight to your rifle. So you are not going to have any portability issues.

Primary Weapons J-TAC47
Via: @brandor23

The only setback is the cost. If you budget-minded, you are going to find this device pricey. But you can always choose to spend the extra bucks since you are going to get something of value that you can use for many years to come.

Main Features

  • Two J-Shaped Ports On The Sides
  • Mitigates Muzzle Climb
  • 14×1 Left Hand Threads
  • Made From Stainless Steel
  • Manganese Phosphate Finish
  • Notched Rear End
  • High Heat Polymer Washer
  • Heat Resistant Up To 900 Degrees
  • Extremely Lightweight

Pros:

  • Strong and durable construction
  • Resistant to corrosion and wear
  • Excellent design
  • Reduces muzzle climb, recoil, and concussion
  • Ideal for AK47 rifles
  • Extremely lightweight
  • Improved rifle control and accuracy

Cons:

  • Some users may find it expensive

4. Primary Weapons FSC47 MOD 2 Review

Primary Weapons FSC47 MOD 2

This is another great compensator by Primary Weapons.

The Primary Weapons FSC47 MOD 2 is quite popular with AK operators and it is designed for AK-style rifles.

This device does what it’s designed to do which is to reduce muzzle climb, smooth out impulse, and mitigate flush.

So its a compensator, flash hider, and muzzle brake all in one. 

It does give you better control of your rifle because it compensates for muzzle climb and recoil. And it also improves your accuracy because it keeps your gun steady when you are shooting. 

This model is made of steel, which is durable, lightweight, and corrosion-resistant.

You can go out hunting or shooting targets in the rain or in freezing weather and this bad boy is going to perform optimally.

Primary Weapons FSC47 MOD 2 Review, Pros and Cons

AK operators who take part in shooting competitions or who are in law enforcement may find this device extremely handy and reliable. Because it allows you to make quick follow-up shots without compromising your accuracy.

Primary Weapons FSC47 MOD 2
Via: @loomdog7.62

It is pricey but it is a hybrid that does more than improving your rifle’s capabilities.

Main Features

  • Unique Port Design
  • 14x1mm LH Threading
  • Designed For Competitions & Tactical Use
  • Provides Enough Flash Suppression
  • For Superior Muzzle Stabilization
  • Without The Teeth-Rattling Overpressure
  • Made Of Steel
  • Durable, Lightweight & Corrosion-Resistant
  • Extremely Handy & Reliable

Pros:

  • Effectively reduces recoil and muzzle climb
  • Reduces flash
  • Provides excellent rifle control
  • Improves accuracy
  • Ideal for tactical use and competitions
  • Great port design
  • Durable and strong construction

Cons:

  • It is pricey

5. Precision Armament A04022 M4-72 Review

Precision Armament A04022 M4-72

The Precision Armament A04022 M4-72 is your go-to muzzle device for optimum muzzle climb and recoil reduction.

And one of the things we love about this device is the design.

The large openings on the sides of the device are shaped like gills.

So if you have a rifle that is loud and produces a huge blast when you shoot it, this device can help mitigate that blast without increasing the noise.

It does an excellent job of reducing recoil significantly because it uses a reverse venting baffle design that redirects the blast towards you.

The design also helps reduce muzzle climb. When you are doing quick follow-up shots, your rifle is not going to rise at all. So it does a great job at what it’s designed to do.

Precision Armament A04022 M4-72 Review, Pros and Cons

But while it is an excellent compensator, you don’t want to use this muzzle when shooting next to other shooters if you don’t want to get the stink eye. Because it’s pretty bright and loud.

So it’s not ideal for tactical use or indoor range shooting, but it’s great for competitions and target shooting. It a standard steel unit, so it’s durable and sturdy. And it can withstand harsh conditions.

Main Features

  • 14x1mm LH Threading
  • Reverse Venting Triple Baffle Design
  • Minimal Dust Signature
  • Closed Bottom Construction
  • High Strength 416 Stainless Steel
  • Black Lonbond Finish
  • Superior Durability
  • Withstands The Extreme Heat Of Combat Conditions
  • Includes Proprietary Crush Springs

Pros:

  • Great for target shooting and competitions
  • Durable and sturdy construction
  • Effectively reduces muzzle climb and recoil
  • Excellent port design
  • Can fit any AK-style rifle

Cons:

  • Loud and bright
  • Not ideal for indoor range shooting or tactical use
  • It is expensive

Buyer’s Guide

Most compensators are said to reduce muzzle climb and recoil. But compensators are designed to minimize muzzle climb whereas muzzle breaks are designed to mitigate recoil. So how can a compensator do the work of a muzzle brake?

Simple. Most muzzle brakes and compensators are combined in one unit. It’s hard to get a compensator that does not act as a brake and vice versa. But it really comes down to the design.

Muzzle brakes have holes or vents usually located on the sides and compensators have holes on the top. A muzzle brake that has holes on the top, as well as the sides, is both a brake and a compensator. 

When you go out shopping for a compensator, you are going to quickly find out that standalone compensators are hard to come by. And in any case, you would want a device that reduces recoil and minimizes muzzle climb.

But having said that, you need to consider certain factors when choosing a compensator. So let us look at some of these factors.

Shooting Situation

Compensators are great for competitions and shooting targets. But for tactical use or indoor range shooting, they are not because they are extremely loud and they do nothing to help reduce flash signature.

Primary Weapons J-TAC47
Via: @hillbilly_hitsquad

Even those that are designed to act as flash hiders, don’t mitigate flash very well, which is a problem if there are other shooters near or next to you. So consider your shooting situation when choosing a compensator.

Material and Construction

Compensators are made using high-grade aluminum or steel because of the strength and the durability of these materials among other properties.

Primary Weapons J-TAC47
Via: @hillbilly_hitsquad

The material is important because it determines how well the compensator performs, what conditions it can withstand, and how long it can last before its starts to wear. 

As for the construction, compensators have slots or vents on the top. When you shoot your rifle, a chemical reaction occurs that causes an explosion followed by an expansion of gases that propel the bullet out of the muzzle.

These gases exit through these openings thereby reducing muzzle climb and recoil. So the more holes a compensator has, the more effective it is.

Additional Attachments

You can attach certain devices to a compensator like a concussion reduction device to help mitigate flash signature. But not all compensators have this capability.

So if this is something you would like, get a compensator you can use with other devices. It is going to greatly change your shooting game.

Conclusion

Compensators help minimize muzzle climb. And to some extent, they also help reduce recoil. But they are also loud and therefore, not ideal for indoor shooting.

Choosing to buy one for your AK47 should depend on your shooting style. If you like shooting targets or take part in shooting competitions, then they are just what you need to help you improve your accuracy.

Best AK47 Compensator

Leave a Comment